T 150K
SPINDLE MOULDER WITH TILTING SPINDLE
TECHNICAL FEATURES
- worktable dimensions 1200 x 730 mm
- spindle tilting -10 + 45 deg.
- working height of spindle 180 mm
- spindle speeds 3.000/4.500/6.000/7.000/10.000 rpm
- max. tool diam. with profiling fence 250 mm
- max. tool diam. retractable under the table 320x130 mm
- exhaust hood on fence and behind the base 120 mm
- main motor power 5,5 KW 7,5HP 50 HZ
Standard equipment
- adjustable fence
- wooden fence with connecting wooden table
- manual lifting and tilting of spindle with adjustment by handwheels
accessible from the front of the machine
- mechanical display for fence and spindle adjustment with decimal control of
the following:
* vertical adjustment of the spindle
* spindle tilting
- emergency pushbotton
- overload switch protection
- auxiliary low voltage circuit (110 volt)
- safety microswitches on motor access door
|
01.06.92 |
T 150K Spindle Moulder w. tilting spindle(C.E. Norms) |
LST |
|
- spindle protection for operation
(max. tool diameter 160 mm)
- working height of spindle without slots:
* 140 mm with diam. 30-35 mm
* 180 mm with diam. 40-45 mm
- electrical pre-setting for feeder
- automatic safety brake on motor
- speed display dial
- manual star-delta start
- certificate of conformity with "C.E. standards"
|
24.01.83 |
Aluminium fence instead of wooden fence |
LST |
|
with connecting bars between the two tables
|
26.01.04 |
Interchangeable spindle with MK5 attachment |
LST |
|
instead of standard one
|
|
TOTAL PRICE TO ABOVE SPECIFICATION |
LST |
|
ON REQUEST:
|
11.02.54 |
"LL" version with 2 profiling extensions |
LST |
|
- total length of table 2500 mm complete with
front support bar for large workpieces;
- emergency pushbutton.
|
57.00.00 |
"TL" version for tenoning-profiling (C.E.) |
LST |
|
- with manual feed tenoning carriage,
- eccentric clamp,
- telescopic tilting fence with 4 positioning
reference stops for programming of workpiece
length,
- no. 1 anti-splinter device on fence with
reference stop,
- no. 1 infeed table extension complete with
adjustable front support bar for large
workpieces,
- tenoning hood with exhaust hood,
* with spindle from 30 to 35 mm, max tool diameter
300 mm
* with spindle from 40 to 50 mm, max. tool diameter
350 mm,
- emergency pushbutton,
- operator arm protection,
- microswitches for control and limit of
3000/4500 rpm during tenoning operations.
N.B. (available only for machine configuration in
conformity with C.E. Norms)
|
11.02.06 |
Carriage on fix table for small tenoning operations |
LST |
|
complete with +-60° swivelling fence with mobile stops,
telescopic extension and eccentric clamp
250 mm max. tool diameter, with standard profiling fence.
|
40.01.50 |
"FAST" section table replacing the table rings |
LST |
|
to optimize the working support under the cutting tool
with external adjustment.
|
40.01.25 |
Spindle moulder fence with adjustment by crank |
LST |
|
Spindle moulder fence with continuously linear adjustment by crank accessible from the front of the machine:
* total adjustment of fence to tool
* thickness control of cutting stroke
- mechanical readout for the adjustment
- wooden tables and connecting bars
- max. tool diameter 250 mm
|
40.01.24 |
"FLEX" spindle moulder fence with adjustment |
LST |
|
by handwheels
Spindle moulder fence with continuously linear adjustment by handwheels accessible from the front of the machine
* mechanical readout for the adjustment
* first handwheel enables adjustment of fence
to tool
* second handwheel controls thickness of cutting
stroke
- wooden tables and connecting bars
- max tool diam. 250 mm
the fence can be totally excluded from worktable
|
13.02.08 |
Spare interchangeable spindle |
LST |
|
|
20.50.82 |
Manual feeder support |
LST |
|
Cross support that utilizing the column support of the
mobile control panel ensures:
* manual height adjustment of feeder by means of
handwheel with mechanical digital readout
* manual adjustment of horizontal arm support position
by means of handwheels
This device allows the exclusion of the feeder from the working table
N.B. Mobile control panel is compulsory
|
20.50.84 |
Mobile control panel |
LST |
|
|
20.50.81 |
Reverse spindle rotation |
LST |
|
with electrical interlocking for reverse operation
|
20.50.44 |
Inverter for speed change from 3300 to 10000 rpm |
LST |
|
- spindle speed choice by means of selector from control
panel, with electronic digital readout of speed rotation.
- automatic start main motor
- electronic motor brake
|
20.50.46 |
Inverter for speed change from 900 to 10.000 rpm |
LST |
|
It is necessary for sanding operation
- spindle speed choice by means of selector from
control panel, with electronic digital readout of
rotation speed.
- automatic start main motor
- electronic motor brake
|
20.50.83 |
Main motor 7,5KW/10HP/50HZ (9KW/12HP/60HZ) |
LST |
|
with automatic star-delta start
|
20.50.80 |
Automatic star-delta start |
LST |
|