T 130NPS
SPINDLE MOULDER WITH SLIDING TABLE
TECHNICAL FEATURES :
- dimensions of fixed worktable 1080x760 mm
- dimensions of sliding table 1080x270 mm
- sliding table stroke 1000 mm
- working height of spindle 180 mm
- spindle speeds 3000/4500/6000/7000/10.000 rpm
- max. dimensions of returning
tool under worktable 320x85 mm
- main motor power 7,5 hp 5,5 kw 50 hz
STANDARD EQUIPMENT :
- adjustable fence with wooden tables and connecting wooden table
(max. tool diam. 250 mm);
- exhaust hood on fence diam. 120 mm;
- rear exhaust hood diam. 120 mm;
- mobile fence -45 +45 deg. with telescopic extension, complete with
eccentric clamp;
- mechanical digital readout of working height with decimal control
- emergency pushbotton
- padlockable main switch
- overload switch protection
- auxiliary low voltage circuit (110 volts).
01.06.70 | T130 NPS Spindle Moulder with sliding table *C.E.* | LST |
|
- automatic brake on motor
- microswitches on motor access door
and on spindle locking
- working height of spindle without slot:
140 mm with diam. 30-35 mm
180 mm with diam. 40-50 mm
- spindle protection for operation
(max. tool diam. 160 mm)
- tenoning table
- tenoning hood with exhaust hood:
* max. tool diam. 300 mm with spindles 30-35 mm
* max. tool diam. 350 mm with spindles 40-50 mm
- operator arm protection
- microswitches for control and limit
of 3000/4500 rpm during tenoning operation
- electrical pre-setting for feeder
- automatic brake on motor
- safety microswitches on motor access door and on
spindle locking
- speed display dial
- manual star-delta-start
- certificate of conformity "C.E. standards"
| TOTAL PRICE TO ABOVE SPECIFICATION | LST |
|
ON REQUEST:
40.01.25 | Spindle moulder fence with adjustment by crank | LST |
|
Spindle moulder fence with continuously linear adjustment by crank accessible from the front of the machine:
* total adjustment of fence to tool
* thickness control of cutting stroke
- mechanical readout for the adjustment
- wooden tables and connecting bars
- max. tool diameter 250 mm
24.01.64 | "FLEX" spindle moulder fence with adjustment | LST |
|
by handwheels.
Spindle moulder fence with continuously linear adjustment by handwheels accessible from the front of the machine
* mechanical readout for the adjustment
* first handwheel enables adjustment of fence
to tool
* second handwheel controls thickness of cutting
stroke
- wooden tables and connecting bars
- max tool diam. 250 mm
the fence can be totally excluded from worktable
24.01.54 | Aluminium fence instead of wooden fence | LST |
|
with connecting bars between the two tables
26.01.08 | MK5 interchangeable spindle | LST |
|
13.02.09 | Spare spindle (for interchangeable spindle) | LST |
|
36.14.08 | Mobile control panel | LST |
|
24.05.05 | 2-speed powered lifting spindle with | LST |
|
micrometric approach.
- electronic digital readout with decimal control of
the working height
20.50.82 | Manual feeder support | LST |
|
Cross support that utilizing the column support of the
mobile control panel ensures:
* manual height adjustment of feeder by means of
handwheel with mechanical digital readout
* manual adjustment of horizontal arm support position
by means of handwheels
This device allows the exclusion of the feeder from the working table
N.B. Mobile control panel is compulsory
20.50.86 | Powered feeder support | LST |
|
Cross support that utilizing the column support of the
mobile control panel ensures:
* powered height adjustment of feeder with mechanical
digital readout
* manual adjustment of horizontal arm support position
by means of handwheels
This device allows the exclusion of the feeder from the working table
N.B. (the mobile control panel is compulsory)
27.01.00 | Reverse spindle rotation | LST |
|
with electrical interlocking for reverse operation
20.50.13 | Inverter for speed change from 3300 to 10000 rpm | LST |
|
- spindle speed choice by means of selector from control
panel, with electronic digital readout of speed rotation.
- automatic start main motor
- electronic motor brake
20.50.17 | Inverter for speed change from 900 to 10.000 rpm | LST |
|
It is necessary for sanding operation
- spindle speed choice by means of selector from
control panel, with electronic digital readout of
rotation speed.
- automatic start main motor
- electronic motor brake
93.01.00 | Automatic star-delta start | LST |
|