SCM T130 CLASS SPINDLE MOULDER

T 130CLASS

SPINDLE MOULDER WITH RAPID TOOL CHANGE

TECHNICAL FEATURES :

- worktable dimensions 1200X730 mm

- spindle speeds 3300/4400/5600/7500/10000 rpm

- max height of spindle 140 mm

- max. tool diam. with profiling fence 250 mm

- max. tool diam. retractable under the table 300X85 mm

- exhaust hood on fence and behind the base diam.120 mm

- main motor power 7,5 hp 5,5 kw 50 hz

- pneumatic working pressure min. 6 bar

STANDARD EQUIPMENT :

- n. 5 quick change spindles (ISO 40);

- one tool rack for 5 tool holders

- pneumatic device for automatic release of spindle;

- "FLEX" spindle moulder fence with adjustment by handwheels

accessible from the front of the machine;

- mechanical display for fence and spindle adjustment with decimal control

of the following :

* fence translation according to the tool diameter

* stock removal adjustment on infeed fence

* vertical adjustment of the spindle

- wooden fence with connecting wooden table,

- total exclusion of "FLEX" fence from table;

- "FAST" section table to optimize the working support under the cutting

tool with external adjustment, replacing the table rings;

- safety microswitches on motor access door;

- speed display dial;

- automatic safety brake on motor;

- emergency pushbotton

- padlockable main switch

- overload switch protection

- auxiliary low voltage circuit (110 volt)

- spindle protection for operation,

max. tool diam. 160 mm

- electrical pre-setting for feeder

- manual star-delta start motor

- certificate of conformity with "C.E. Standards"

with connecting bars between the two tables

ON REQUEST:

- total length of table 2500 mm complete with

front support bar for large workpieces;

- emergency pushbutton.

- with manual feed tenoning carriage,

- eccentric clamp,

- telescopic tilting fence with 4 positioning

reference stops for programming of workpiece

length,

- no. 1 anti-splinter device on fence with

reference stop,

- no. 1 infeed table extension complete with

adjustable front support bar for large

workpieces,

- tenoning hood with exhaust hood

(max. tool diameter 300 mm)

- emergency pushbutton,

- operator arm protection,

- microswitches for control and limit of

3000/4500 rpm during tenoning operations.

complete with +-60° swivelling fence with mobile stops,

telescopic extension and eccentric clamp

250 mm max. tool diameter, with standard profiling fence.

* motor power KW 2,2 HP3

* tool diameter 200 mm max., 180 mm min.

* maximum tool thickness 30 mm

* tool holder 25 mm diameter

* min. distance of the tool spindle axe from the

working table 115 mm

* exhaust hood 80 mm diameter

* Glazing bead support complete with

anti/kickback finger

The group is complete with the following devices:

* fence with infeed aluminium table and outfeed

cast iron table

* outfeed fence table with adjustable insert, for

the support during glazing bead operation,

complete with stops

* counter opposed fence, applicable on the table

* "LL" version with two table extensions with

2500 mm total length, complete with mobile

front support

* automatic star-delta start motor

with micrometric approach

- electronic digital readout with decimal control of the

working height

Cross support that utilizing the column support of the

mobile control panel ensures:

* manual height adjustment of feeder by means of

handwheel with mechanical digital readout

* manual adjustment of horizontal arm support position

by means of handwheels

This device allows the exclusion of the feeder from the working table

N.B. Mobile control panel is compulsory

Cross support that utilizing the column support of the

mobile control panel ensures:

* powered height adjustment of feeder with mechanical

digital readout

* manual adjustment of horizontal arm support position

by means of handwheels

This device allows the exclusion of the feeder from the working table

N.B. (the mobile control panel is compulsory)

complete with :

- mobile control panel;

- total exclusion of fence from table;

- 2-axis microprocessor controlled electronic

programmer for the automatic programming of the

different fence and spindle positions;

- Flex spindle moulder fence, with adjustment by

infeed handwheel; electric adjustment of fence

to tool by means of continuous motor

- sequential movement of both axes;

- storage capacity 999 programs (each program

includes 2 axes);

- possibility of selecting simultaneously any

position of the axes independently from the

999 programs already stored;

- membrane keyboard, 5-inch video screen LCD

- in line readout for the operative machine condition

- capacity to customize program's name

- possibility of re-setting machine;

- aluminium fence instead of wooden fence with

connecting bars between the two tables

- speed display dial

- automatic star-delta start motor

with electrical interlocking for reverse

operation

- spindle speed choice by means of selector from control

panel, with electronic digital readout of speed rotation.

- automatic start main motor

- electronic motor brake

It is necessary for sanding operation

- spindle speed choice by means of selector from

control panel, with electronic digital readout of

rotation speed.

- automatic start main motor

- electronic motor brake

with automatic star-delta-start