SCM SINTEX XL AUTOMATIC FOUR SIDED PLANER
SINTEX XL Automatic Profiling Multi-Planer
MAIN FEATURES
Machine base
The robust machine base is constructed from heavy ribbed tubular steel section ensuring that vibration is reduced to a minimum and guarantees along-life with constant performance.
Worktables
The tubular steel in feed table with its parallelogram system for vertical adjustment has a hardened insert before the planer spindle. The cast iron worktables have a low friction co-efficient and are extremely hardwearing.
Fences
The in feed fence is adjustable width wise through a parallelogram system and is complete with a pre-straightening system via the reference engraver placed on the planer spindle.
Feed system
The top beam which incorporates the feed system is constructed from a thick, ribbed tubular steel section with manual vertical adjustment (powered as an optional).
Shafts and feed rollers are of steel with a hardened surface.
Rapid adjustment system
Pressers placed in front and behind the top horizontal spindle are simultaneously adjustable with spindle and feed rollers.
The left vertical spindle with in feed presser group and out feed fence are simultaneously adjustable for a prompt and easy set up.
Positioning of working units
All adjustments of working units are controlled from the front of the machine with mechanical decimal readout of work section.
Standard equipment
- 1 reference engraver diam.125x35x12 mm. with 2 cutting edges
- 2 planer cutter heads for horiz. spindle dia.100x185x35 mm with 2 HSS knives
- 2 planer cutter heads for vertical spindles dia. 100x115x35 mm with 2 HSS knives
- service spanners
TECHNICAL FEATURES
· min. working width (finished section) 23 mm
· max. working width (finished section) 180 mm
· min. working height (finished section) 6 mm
· max. working height (finished section) 105 mm
· min. length of single work piece 300 mm
· feed speed 6÷12 m/min
· spindle speed 6000 rpm
· dia. of spindles 35 mm
· min./max. dia. of cutter heads on horizontal spindles 100 mm
· min. dia. of cutter heads on right vertical spindle 100 mm
· max. dia. of cutter heads on right vertical spindle 100-112 mm
* profiling capacity 6 mm
* axial stroke not available
· min. dia. of cutter heads on left vertical spindle 100 mm
· max. dia. of cutter heads on left vertical spindle 100-120 mm
* profiling capacity 10 mm
*axial stroke not available
· adjustment of groups in respect of difference
in dia. of cutter heads ± 1 mm
· max. length of vertical spindles 120 mm
· max. length of horizontal spindles 190 mm
· motor power of horizontal spindles 10 hp (7,5 KW)
· motor power of vertical spindles 10 hp (7,5 KW)
· feed motor power 1-1,5 h (0,75 - 1,1 KW)
· dia. of feed rollers 120 mm
· in feed table length 1700 mm
· fast adjustment of in feed table and fence 10 mm
· dia. of dust extraction outlets: no. 1 150 mm
no. 2 120 mm
SINTEX XL
Automatic Profiling Multi-Planer
04.22.13 | SINTEX XL: Automatic profiling multi-planer |
|
|
Pos. 4 Pos. 2
feeding
Pos. 3 Pos. 1
Position 1 = planer spindle
Position 2 = right vertical spindle
Position 3 = left vertical spindle
Position 4 = top horizontal spindle
Complete with:-
TERSA, disposable 2 knife planer blocks & reference engraver:-
2 off 100 x 185 x 35mm horizontal blocks
2 off 100 x 115 x 35mm vertical blocks
1 off 125 x 12 x 35mm reference engraver
23.15.08 | Powered feeding group before surface planer |
|
|
with lever for mechanical exclusion of group
- equipped with 2 feed rollers.
97.03.36 | 10 hp(7,5 kw) increased motor power on vertical spindles |
|
|
50.00.50 | European safety regulations ( C.E. norms ) |
|
|
Services 00.UK.00 | Commissioning & Instruction by SCM Technician | 00.UK.01 | Delivery to site on a craned wagon |
Total Price to the above specification £ CALL
|