SCM SI400N SI400E SLIDING TABLE PANEL SAWS

SI 400

CIRCULAR SAW WITH TILTING BLADE

TECHNICAL FEATURES :

- squaring capacity with extended stop:

* with 2200 mm carriage 2200X2500 mm

* with 3200 mm carriage 3200X3200 mm

* with 3800 mm carriage 3800X3200 mm

- blade tilt 45 deg.

- max. cutting height at 90 deg. (blade 400 mm) 130 mm

- max. cutting height at 45 deg. (blade 400 mm) 92 mm

- blade speed 3000-4000-5000 rpm

- scoring unit speed 8500 rpm

- diam. of exhaust outlet at base 120 mm

- main motor power 5,5KW 7,5HP 50HZ

- scoring unit motor power 0,75KW 1HP 50HZ

STANDARD EQUIPMENT :

- aluminium alloy carriage sliding on high precision "arch-formed" hardened

steel guides, which are fixed on the carriage by means of reveting

system;

- squaring frame complete with mobile aluminium bar for the fast fence

positioning for angular cuttings

- independently powered scoring unit with external setting up and stops for a

quick re-positioning of the blade

- rip fence with sliding system 50 mm diameter bar, with micrometric

adjustment

- eccentric clamp;

- table extension on exit side

- overload switch protection

- auxiliary low voltage circuit (110 volts)

- direct start main motor

SI400

CIRCULAR SAW WITH TILTING BLADE

- manual lifting and tilt of saw unit by means of

handwheels located on the front machine side

- n. 2 mechanical readouts of tilt and lifting

- overhead saw guard with incorporated dust extraction

100 mm diameter

- blade access door with safety microswitch and

quick locking

- emergency pushbuttons located on the front machine

side and on parallel fence side

- automatic brake on motor

- ripping capacity on parallel fence of 1270 mm

- certificate of conformity with "C.E. Standards"

- manual lifting and tilt of saw unit by means of

handwheels located on the front machine side

- n. 2 mechanical readouts of tilt and lifting

- overhead saw guard with incorporated dust extraction

100 mm diameter

- blade access door with safety microswitch and

quick locking

- emergency pushbuttons located on the front machine

side and on parallel fence side

- automatic brake on motor

- compact squaring frame with fence

- ripping capacity on parallel fence of 1000 mm

- certificate of conformity with "C.E. Standards"

- Easy

* 2-axis electronic positioner for saw blade lifting and

tilting selectable by means of numerical keyboard

and displayed on electronic digital readouts

* memory capacity up to 300 working programs

* function to assist stop positioning on the squaring

fence, essential to carry out cuts with tilted blade

and/or angular cutting on the worktable

- overhead saw guard with incorporated dust extraction

100 mm diameter

- blade access door with safety microswitch and

quick locking

- emergency pushbuttons located on the front machine

side and on parallel fence side

- automatic brake on motor

- ripping capacity on parallel fence of 1270 mm

- certificate of conformity with "C.E. Standards"

easy to reach by the operator

N.B. (available only for E version)

integrated in the sliding carriage for saw and scoring

blade

controlled axis, complete with:

- memory capacity up to 300 working programs

- programming of sequential measures for the execution

of maximum 6 cuttings, with a single program

- electronic readout of loaded working measures.

- sliding on two precision prismatic guides by means of

recirculating ball screws pads

- movement through recirculating ball screw,

25 mt/min max. speed

- exclusion of fence under worktable

- presence detection system for the automatic change of

fence position, according to the used fence profile

(high or low)

- cutting width on the parallel fence, 1500 mm

N.B. (available only for "E" versions)

with self-adjustment of the stop position in respect of

the blade, irrespective of the angles utilized, complete

with aluminium fence with one stop

- n.3 available stops

- choice of each single stop

- position readout on magnetic tape, complete with

battery and recharging unit to be connected to the

electrical outlet

N.B. (not available for versions with 2200 mm carriage)