SCM SI350N SI350E SLIDING TABLE PANEL SAWS

SI 350

CIRCULAR SAW WITH TILTING BLADE

TECHNICAL FEATURES :

- squaring capacity with extended stop:

* with 2200 mm carriage 2200X2500 mm

* with 3200 mm carriage 3200X3200 mm

* with 3800 mm carriage 3800X3200 mm

- blade tilt 45 deg.

- max. cutting height at 90 deg. (blade 350 mm) 118 mm

- max. cutting height at 45 deg. (blade 350 mm) 81 mm

- blade speed 4000 rpm

- scoring unit speed 8500 rpm

- diam. of exhaust outlet at base 120 mm

- main motor power 4KW 5,5HP 50 HZ

- scoring unit motor power 0,75KW 1HP 50 HZ

STANDARD EQUIPMENT :

- aluminium alloy carriage sliding on high precision "arch-formed" hardened

steel guides, which are fixed on the carriage by means of reveting

system;

- squaring frame complete with mobile aluminium bar for the fast fence

positioning for angular cuttings

- independently powered scoring unit with external setting up and stops for a

quick re-positioning of the blade

- rip fence with micrometric adjustment

- eccentric clamp;

- table extension on exit side.

- overload switch protection

- auxiliary low voltage circuit (110 volts)

- direct start main motor

SI350

CIRCULAR SAW WITH TILTING BLADE

- manual lifting and tilt of saw unit by means of

handwheels located on the front machine side

- mechanical readout of tilt, on the machine front side

- overhead saw guard with incorporated dust extraction

100 mm diameter

- blade access door with safety microswitch and

quick locking

- emergency pushbuttons located on the front machine

side and on parallel fence side

- automatic brake on motor

- ripping capacity on parallel fence of 1270 mm

- certificate of conformity with "C.E. Standards"

- manual lifting and tilt of saw unit by means of

handwheels located on the front machine side

- mechanical readout of tilt, on the machine front side

- overhead saw guard with incorporated dust extraction

100 mm diameter

- blade access door with safety microswitch and

quick locking

- emergency pushbuttons located on the front machine

side and on parallel fence side

- automatic brake on motor

- compact squaring frame with fence

- ripping capacity on parallel fence of 1000 mm

- certificate of conformity with “C.E. Standards”

- powered lifting and tilt of saw unit

- n° 2 electronic digital readouts of tilt and lifting

- overhead saw guard with incorporated dust extraction

100 mm diameter

- blade access door with safety microswitch and

quick locking

- emergency pushbuttons located on the front machine

side and on parallel fence side

- automatic brake on motor

- ripping capacity on parallel fence of 1270 mm

- certificate of conformity with "C.E. Standards"