SCM SI300S SLIDING TABLE PANEL SAW
SI 300S
 CIRCULAR SAW WITH TILTING BLADE AND SHORT CARRIAGE
TECHNICAL FEATURES :
- squaring capacity with extended stop:
* SI300S 1600X2200 mm
- blade tilt 45 deg.
- max. cutting height (with 315 mm at 90°) 100 mm
- max. cutting height (with 315 mm at 45°) 70 mm
- blade speed 4000 rpm
- speed of scoring unit 8000 rpm
- diam. of exhaust outlet at base 120 mm
- cutting width on rip fence 1000 mm
- motor power 4KW 5,5HP 50Hz
STANDARD EQUIPMENT :
- version with compact base and short carriage
- compact squaring frame support with fence
- aluminium alloy carriage sliding on hardened steel guides, which are fixed
on the carriage by means of reveting system
- manual lifting and tilt of saw unit by means of handwheels on the machine
front side
- blade protection on riving knife with exhaust outlet diam. 60 mm
- mechanical readout of tilt, on the machine front side
- squaring frame complete with mobile aluminium bar for the fast fence
positioning for angular cuttings
- control panel on the machine front side tilted 25 degrees
- scoring unit with external setting up and stops for a quick re-positioning of
the blade
- belt driven scoring unit ;
- rip fence with micrometric adjustment;
- eccentric clamp;
- table extension on exit side.
- overload switch protection
- auxiliary low voltage circuit (110 voltage)
- direct start main motor
SI300 S
CIRCULAR SAW WITH TILTING BLADE AND SHORT CARRIAGE
01.05.84 | SI 300S - Circular Saw with tilting blade (C.E. Norms) | LST |
|
- blade access door with safety microswitch and quick
locking
- blade protection support with exhaust pipe
- emergency pushbottons located on the machine front
side and on parallel fence side
- certificate of conformity with "C.E. Standards"
25.01.48 | Independently powered scoring unit, 8500 rpm speed | LST |
|
0,75 KW, 1 HP, 50 HZ (0,9 KW, 1,2 HP, 60 HZ)
N.B. (available only for SI 300 N and SI 300 S version)
28.01.29 | Ripping capacity on parallel fence of 1500 mm | LST |
|
97.04.49 | Motor 5,5KW - 7,5HP - 50 HZ (6,6KW - 9 HP -60 HZ) | LST |
|
| TOTAL PRICE TO ABOVE SPECIFICATION | LST |
|
ON REQUEST:
28.01.44 | Ripping capacity on parallel fence of 1270 mm | LST | --- |
19.03.05 | Overhead saw guard with incorporated dust extraction, | LST |
|
diam. of outlet 100 mm
57.00.08 | Kit to install 400 mm diameter saw blade (C.E.) | LST |
|
Device for 130 mm cutting height with 90° blade,
complete with:
- overhead blade protection
- 5,5 KW (7,5 Hp) motor power, 50 Hz frequency
- independently powered scoring unit, 8500 rpm speed;
Kw 0,75 (1 Hp), 50 Hz
- automatic motor brake on main saw blade
- 3500 rpm main blade speed
27.14.03 | Automatic brake on main sawblade | LST |
|
|