SCM SI300N SLIDING TABLE PANEL SAW

SI 300

CIRCULAR SAWS WITH TILTING BLADE

TECHNICAL FEATURES :

- squaring capacity with extended stop:

* with 2200 mm carriage 2200X2500 mm

* with 3200 mm carriage 3200x3200 mm

* with 3800 mm carriage 3800x3200 mm

- blade tilt 45 deg.

- max. cutting height (with 315 mm at 90°) 100 mm

- max. cutting height (with 315 mm at 45°) 70 mm

- blade speed 4000 rpm

- speed of scoring unit 8000 rpm

- diam. of exhaust outlet at base 120 mm

- motor power 4KW 5,5HP 50Hz

STANDARD EQUIPMENT :

- aluminium alloy carriage sliding on high precision "arch-formed" hardened

steel guides, which are fixed on the carriage by means of reveting system

- blade protection on riving knife with exhaust outlet diam. 60 mm

- squaring frame complete with mobile aluminium bar for the fast fence

positioning for angular cuttings

- scoring unit with external setting up and stops for a quick re-positioning of

the blade

- rip fence with micrometric adjustment;

- eccentric clamp;

- table extension on exit side.

- overload switch protection

- auxiliary low voltage circuit (110 voltage)

- direct start main motor

SI300

CIRCULAR SAWS WITH TILTING BLADE

- manual lifting and tilt of saw unit by means of

handwheels on the machine front side

- mechanical readout of tilt, on the machine front side

- belt driven scoring unit

- blade access door with safety microswitch and quick

locking

- emergency pushbuttons located on the machine front

side and on parallel fence side

- ripping capacity on parallel fence of 1270 mm

- certificate of conformity with "CE-Standards".

0,75 KW, 1 HP, 50 HZ (0,9 KW, 1,2 HP, 60 HZ)

N.B. (available only for SI 300 N and SI 300 S version)