SCM COMPACT XL4 AUTOMATIC FOUR SIDED PLANER
COMPACT XL
 Automatic Through Feed Planer Moulder
GENERAL FEATURES
Machine bed
The machine bed is of thick steel with strongly ribbed structure and tubular supporting base.
Worktables
The tubular steel in feed worktable has a parallelogram system for vertical adjustment and is fitted with a hardened insert placed before planer spindle.
Worktables are of hardwearing special cast iron with a low coefficient of friction and are equipped with removable inserts in front of the vertical spindles.
Fences
The right in feed fence has a parallelogram system for width wise adjustment through reference engraver (tool not included).
Right fences with easily adjustable sectors for correct positioning according to the tools used.
Spindles
The spindles have a hardened surface to avoid wear. The 100 mm diameter steel spindle barrel ensures the maximum stiffness and precision even during heavy duty machining.
Feed system
The beam which supports the feed system is of a tubular ribbed structure and is provided with manual rise & fall movement (can be powered on request).
The feed system has 2 speeds. On request, variable is available which is continuously adjustable from the operator position through a step less gearbox.
A powered roller placed on the out feed table improves feed when dealing with particular machined sections. Spindles and feed rollers are made of steel with hardened surfaces.
"SET UP" quick adjustment system
It is a patented, exclusive SCM device allowing very easy and quick setting-up with every tool change. The right and left vertical spindles (on request also top horizontal spindle) are equipped with the "SET UP" quick adjustment system, which allows the set-up of the machine in one single step. It is enough to set the minimum diameter of the tool (in the case of a top horizontal spindle), and the tool itself, working thickness, front/rear pressures, feed rollers are automatically adjusted.
Positioning of working units
Adjustment of working units are controlled from the machine front with mechanical digital readout of position. Work piece section is displayed on mechanical decimal readouts placed on machine front.
Ergonomics
All controls are placed on the front of the machine at a suitable height for easy use.
The integral protective enclosure ensures low emission of noise and dust guaranteeing a full view of the machine at the same time.
TECHNICAL SPECIFICATIONS
- minimum working width (finished section) 25 mm*
- maximum working width (finished section) 230 mm**
- minimum working thickness (finished section) 6 mm***
- maximum working thickness (finished section) 120 mm
- minimum length of single component (composition 1) 450 mm****
- minimum length of single component (composition 5) 625 mm*****
- feed speed 6-12 m/min
- feed motor 1,3/1,7 HP (1/1,3 KW)
- motor of planer spindle 5,5 HP (4 KW)
- motor of vertical spindles 7,5 HP (5,5 KW)
- motor of top and bottom horizontal spindle 5,5 HP (4 KW)
- motor of universal spindle 5,5 HP (4 KW)
- spindle speed 6000 rpm
- diameter of spindles 40 mm
- working length capacity of vertical spindles 140 mm
- working length capacity of horizontal spindles 250 mm
- universal spindle length 240 mm
- axial adjustment of vertical spindles in relation to worktable 40 mm
- axial adjust of horiz. spindles in relation to the right fence 40 mm
- minimum/max tool diameter on surface planer 120-140 mm
- minimum/max tool diameter on vertical spindles 100-180 mm
- minimum/max tool diameter on top horizontal spindle 125 mm******
- minimum/max tool diameter on bottom horizontal spindle 100-180 mm
§ profiling capacity with tool diameter 180 mm 15 mm
- minimum/maximum tool diameter on universal spindle 100-180 mm
- feed roller diameter 140 mm
- in feed table length (straightening capacity) 2000 mm
- rapid adjustment of in feed table and fence 0–10 mm
- hardened insert placed on worktable before planer spindle STD
- 2 feed rollers 140x25 mm for each feed hub STD
- tools excluded
* 15 mm with relative optional
** with 145 tool diameter on left vertical spindle
*** 10 mm with positioning by CNC
**** 427 mm with relative optional
***** 415 mm with relative optional
****** 100-180 mm with relative optional
COMPACT XL-4
Automatic Through Feed Planer Moulder
02.08.06 | Compact XL - composition 1 | | |
Position 1 = planer spindle
Position 2 = right vertical spindle
Position 3 = left vertical spindle
Position 4 = top horizontal spindle
Options for head units
================================================ 11.12.12 | Automatic star-delta starter | | |
- for 5,5 HP (4 KW) and 7,5 HP (5,5 KW) motors* to foresee on all motors
11.12.14 | Increased motor power: planer spindle 7,5 HP (5,5 KW); right/left vertical spindles 15 HP (11 KW); top horizontal spindle 10 HP (7,5 KW) | | |
11.12.18 | Brakes for 3 motors | | |
65.10.14 | Kit for enabling profiling with the top spindle | | |
- min/max. tool diameter 100-180 mm
- axial stroke 40 mm
- 2 mechanical decimal readouts
Options for feed system
=============================================== 65.10.16 | Powered rise & fall of feed system through switch placed on the front of the machine | | |
65.10.12 | Manual lubrication pump for worktable | | |
65.10.18 | Second flanged feed roller opposite left vertical spindle | | |
- roller width 20 mm
65.10.08 | Kit of supplementary flanged feed rollers | | |
in front of left vertical spindle
- 2 steel feed rollers, 20 mm wide
- 2 distance rings, 40 mm wide
Tooling & Measuring Equipment
================================================ 65.10.13 | Kit of planer cutter heads and reference engraver | | |
- reference engraver diam.150x40 mm with 2 knives
- 2 planer cutter heads for horizontal spindles dia.125x235x40 mm with 4 knives
- 2 planer cutter heads for vertical spindles dia. 125x135x40 mm with 4 knives
96.14.53 | PRESET 25: tool diameter measurement device | | |
- centesimal accuracy
Safety regulations
================================================ 10.40.04 | European safety regulations (CE norms) | | |
Services
================================================ 00.UK.00 | Commissioning & Instruction by SCM Technician | | | 00.UK.01 | Delivery to site on a craned wagon | | | Total Price to the above specification including £
| 