SCM T130N SPINDLE MOULDER

T 130N

SPINDLE MOULDER

TECHNICAL FEATURES :

- worktable dimensions 1200X730 mm

- working height of spindle 180 mm

- spindle speeds 3000/4500/6000/7000/10000 rpm

- max. dimensions of returning tool under worktable 320X85 mm

- main motor power 7,5 hp 5,5 kw 50 hz

STANDARD EQUIPMENT :

- adjustable fence with wooden tables and connecting wooden table

(max. tool diam. 250 mm);

- exhaust hood on fence diam. 120 mm;

- rear exhaust hood diam. 120 mm;

- mechanical digital readout of working height with decimal control

- emergency pushbotton

- padlockable main switch

- overload switch protection

- auxiliary low voltage circuit (110 volts)

- working height of spindle without slot:

140 mm with diam. 30-35 mm

180 mm with diam. 40-50 mm

- spindle protection for operations

(max. tool diam. 160 mm)

- safety microswitches on motor access

door and on spindle locking

- electrical pre-setting for feeder

- automatic brake on motor

- speed display dial

- manual star-delta-start

- certificate of conformity with "C.E. standards"

with connecting bars between the two tables

ON REQUEST:

- total length of table 2500 mm complete with

front support bar for large workpieces;

- emergency pushbutton.

- with manual feed tenoning carriage,

- eccentric clamp,

- telescopic tilting fence with 4 positioning

reference stops for programming of workpiece

length,

- no. 1 anti-splinter device on fence with

reference stop,

- no. 1 infeed table extension complete with

adjustable front support bar for large

workpieces,

- tenoning hood with exhaust hood,

* with spindle from 30 to 35 mm, max tool diameter

300 mm

* with spindle from 40 to 50 mm, max. tool diameter

350 mm,

- emergency pushbutton,

- operator arm protection,

- microswitches for control and limit of

3000/4500 rpm during tenoning operations.

N.B. (available only for machine configuration in

conformity with C.E. Norms)

complete with +-60° swivelling fence with mobile

stops, telescopic extension and eccentric clamp.

250 mm max. tool diameter, with standard profiling fence.

glazing bead unit with total exclusion from working table

* motor power KW 2,2 HP3

* tool diameter 200 mm max., 180 mm min.

* maximum tool thickness 30 mm

* tool holder 25 mm diameter

* min. distance of the tool spindle axe from the

working table 115 mm

* exhaust hood 80 mm diameter

* Glazing bead support complete with

anti/kickback finger

The group is complete with the following devices:

* "FLEX" spindle fence with adjustment by

handwheels accessible from the front of the

machine, mechanical readout of the adjustment with

decimal control of the positioning

* infeed aluminium table and outfeed cast iron

table

* outfeed fence table with adjustable insert, for

the support during glazing bead operation,

complete with stops

* max. tool diameter 250 mm

* total exclusion from table

* counter opposed fence, applicable on the table

* "LL" version with two table extensions with

2500 mm total length, complete with mobile

front support

* automatic star-delta start motor

to optimize the working support under the cutting tool

with external adjustment

Spindle moulder fence with continuously linear adjustment by crank accessible from the front of the machine:

* total adjustment of fence to tool

* thickness control of cutting stroke

- mechanical readout for the adjustment

- wooden tables and connecting bars

- max. tool diameter 250 mm

by handwheels.

Spindle moulder fence with continuously linear adjustment by handwheels accessible from the front of the machine

* mechanical readout for the adjustment

* first handwheel enables adjustment of fence

to tool

* second handwheel controls thickness of cutting

stroke

- wooden tables and connecting bars

- max tool diam. 250 mm

the fence can be totally excluded from worktable

Cross support that utilizing the column support of the

mobile control panel ensures:

* manual height adjustment of feeder by means of

handwheel with mechanical digital readout

* manual adjustment of horizontal arm support position

by means of handwheels

This device allows the exclusion of the feeder from the working table

N.B. Mobile control panel is compulsory

Cross support that utilizing the column support of the

mobile control panel ensures:

* powered height adjustment of feeder with mechanical

digital readout

* manual adjustment of horizontal arm support position

by means of handwheels

This device allows the exclusion of the feeder from the working table

N.B. (the mobile control panel is compulsory)

micrometric approach.

- electronic digital readout with decimal control of

the working height

complete with :

- mobile control panel;

- total exclusion of fence from table;

- 2-axis microprocessor controlled electronic

programmer for the automatic programming of the

different fence and spindle positions;

- Flex spindle moulder fence, with adjustment by

infeed handwheel; electric adjustment of fence

to tool by means of continuous motor

- sequential movement of both axes;

- storage capacity 999 programs (each program

includes 2 axes);

- possibility of selecting simultaneously any

position of the axes independently from the

999 programs already stored;

- membrane keyboard, 5-inch video screen LCD

- in line readout for the operative machine condition

- capacity to customize program's name

- possibility of re-setting machine;

- aluminium fence instead of wooden fence with

connecting bars between the two tables

- speed display dial

- automatic star-delta start motor

with electrical interlocking for reverse operation

- spindle speed choice by means of selector from control

panel, with electronic digital readout of speed rotation.

- automatic start main motor

- electronic motor brake

It is necessary for sanding operation

- spindle speed choice by means of selector from

control panel, with electronic digital readout of

rotation speed.

- automatic start main motor

- electronic motor brake

with automatic star-delta-start